List of map projections—Wikipedia, the free encyclopedia


This list/table provides an overview of the most significant map projections, including those listed on Wikipedia. It is sortable by the main fields. Inclusion in the table is subjective, as there is no definitive list of map projections.

Projection Images Type Properties Creator Year Notes
Equirectangular projection SW.jpg Cylindrical Compromise Marinus of Tyre 120 (c.) Simplest geometry; distances along meridians are conserved.
Plate carrée: special case having the equator as the standard parallel.
Mercator projection SW.jpg Cylindrical Conformal Gerardus Mercator 1569 Lines of constant bearing (rhumb lines) are straight, aiding navigation. Areas inflate with latitude, becoming so extreme that the map cannot show the poles.
MercTranEll.png Cylindrical Conformal Carl Friedrich GaussJohann Heinrich Louis Krüger 1822 This transverse, ellipsoidal form of the Mercator is finite, unlike the equatorial Mercator. Forms the basis of the Universal Transverse Mercator system.
Gall stereographic
Gall Stereographic projection SW.JPG Cylindrical Compromise James Gall 1885 Intended to resemble the Mercator while also displaying the poles. Standard parallels at 45°N/S.
Braun is horizontally stretched version with scale correct at equator.
Miller projection SW.jpg Cylindrical Compromise Osborn Maitland Miller 1942 Intended to resemble the Mercator while also displaying the poles.
Lambert cylindrical equal-area Lambert cylindrical equal-area projection SW.jpg Cylindrical Equal-area Johann Heinrich Lambert 1772 Standard parallel at the equator. Aspect ratio of ? (3.14). Base projection of the cylindrical equal-area family.
Behrmann Behrmann projection SW.jpg Cylindrical Equal-area Walter Behrmann 1910 Horizontally compressed version of the Lambert equal-area. Has standard parallels at 30°N/S and an aspect ration of 2.36.
Hobo-Dyer Hobo–Dyer projection SW.jpg Cylindrical Equal-area Mick Dyer 2002 Horizontally compressed version of the Lambert equal-area. Very similar are Trystan Edwards and Smyth equal surface (= Craster rectangular) projections with standard parallels at around 37°N/S. Aspect ratio of ~2.0.
Gall–Peters projection SW.jpg Cylindrical Equal-area James Gall(Arno Peters) 1855 Horizontally compressed version of the Lambert equal-area. Standard parallels at 45°N/S. Aspect ratio of ~1.6. Similar is Balthasart projection with standard parallels at 50°N/S.
Sinusoidal projection SW.jpg Pseudocylindrical Equal-area (Several; first is unknown) 1600(c.) Meridians are sinusoids; parallels are equally spaced. Aspect ratio of 2:1. Distances along parallels are conserved.
Mollweide projection SW.jpg Pseudocylindrical Equal-area Karl Brandan Mollweide 1805 Meridians are ellipses.
Eckert II Eckert II projection SW.JPG Pseudocylindrical Equal-area Max Eckert-Greifendorff 1906
Eckert IV Ecker IV projection SW.jpg Pseudocylindrical Equal-area Max Eckert-Greifendorff 1906 Parallels are unequal in spacing and scale; outer meridians are semicircles; other meridians are semiellipses.
Eckert VI Ecker VI projection SW.jpg Pseudocylindrical Equal-area Max Eckert-Greifendorff 1906 Parallels are unequal in spacing and scale; meridians are half-period sinusoids.
Goode homolosine Goode homolosine projection SW.jpg Pseudocylindrical Equal-area John Paul Goode 1923 Hybrid of Sinusoidal and Mollweide projections.
Usually used in interrupted form.
Kavrayskiy VII Kavraiskiy VII projection SW.jpg Pseudocylindrical Compromise Vladimir V. Kavrayskiy 1939 Evenly spaced parallels. Equivalent to Wagner VI horizontally compressed by a factor of sqrt{3}/{2}.
Robinson Robinson projection SW.jpg Pseudocylindrical Compromise Arthur H. Robinson 1963 Computed by interpolation of tabulated values. Used by Rand McNally since inception and used by NGS 1988–98.
Tobler hyperelliptical Tobler hyperelliptical projection SW.jpg Pseudocylindrical Equal-area Waldo R. Tobler 1973 A family of map projections that includes as special cases Mollweide projection, Collignon projection, and the various cylindrical equal-area projections.
Wagner VI Wagner VI projection SW.jpg Pseudocylindrical Compromise K.H. Wagner 1932 Equivalent to Kavrayskiy VII vertically compressed by a factor of sqrt{3}/{2}.
Collignon Collignon projection SW.jpg Pseudocylindrical Equal-Area Édouard Collignon 1865 (c.) Depending on configuration, the projection also may map the sphere to a single diamond or a pair of squares.
HEALPix HEALPix projection SW.svg Pseudocylindrical Equal-area Krzysztof M. Górski 1997 Hybrid of Collignon + Lambert cylindrical equal-area
Aitoff Aitoff projection SW.jpg Pseudoazimuthal Compromise David A. Aitoff 1889 Stretching of modified equatorial azimuthal equidistant map. Boundary is 2:1 ellipse. Largely superseded by Hammer.
Hammer projection SW.jpg Pseudoazimuthal Equal-area Ernst Hammer 1892 Modified from azimuthal equal-area equatorial map. Boundary is 2:1 ellipse. Variants are oblique versions, centred on 45°N.
Winkel tripel Winkel triple projection SW.jpg Pseudoazimuthal Compromise Oswald Winkel 1921 Arithmetic mean of the equirectangular projection and the Aitoff projection. Standard world projection for the NGS 1998–present.
Van der Grinten Van der Grinten projection SW.jpg Other Compromise Alphons J. van der Grinten 1904 Boundary is a circle. All parallels and meridians are circular arcs. Usually clipped near 80°N/S. Standard world projection of the NGS 1922-88.
Equidistant conic projection
Equidistant conical projection of world with grid.png Conic Equidistant Based onPtolemy’s 1st Projection 100 (c.) Distances along meridians are conserved, as is distance along one or two standard parallels[1]
Lambert conformal conic Lambert conformal conic projection SW.jpg Conic Conformal Johann Heinrich Lambert 1772
Albers conic Albers projection SW.jpg Conic Equal-Area Heinrich C. Albers 1805 Two standard parallels with low distortion between them.
Werner Werner projection SW.jpg Pseudoconical Equal-area Johannes Stabius 1500 (c.) Distances from the North Pole are correct as are the curved distances along parallels.
Bonne Bonne projection SW.jpg Pseudoconical, cordiform Equal-area Bernardus Sylvanus 1511 Parallels are equally spaced circular arcs and standard lines. Appearance depends on reference parallel. General case of both Werner and sinusoidal
Bottomley Bottomley projection SW.JPG Pseudoconical Equal-area Henry Bottomley 2003 Alternative to the Bonne projection with simpler overall shape
Parallels are elliptical arcs
Appearance depends on reference parallel.
American polyconic Polyconic projection SW.jpg Pseudoconical Ferdinand Rudolph Hassler 1820 (c.) Distances along the parallels are preserved as are distances along the central meridian.
Azimuthal equidistant
Azimuthal equidistant projection SW.jpg Azimuthal Equidistant Abu Rayhan Biruni 1000 (c.) Used by the USGS in the National Atlas of the United States of America.Distances from centre are conserved.
Gnomonic Gnomonic projection SW.jpg Azimuthal Gnonomic Thales(possibly) 580 BC (c.) All great circles map to straight lines. Extreme distortion far from the center. Shows less than one hemisphere.
Lambert azimuthal equal-area Lambert azimuthal equal-area projection SW.jpg Azimuthal Equal-Area Johann Heinrich Lambert 1772 The straight-line distance between the central point on the map to any other map is the same as the straight-line 3D distance through the globe between the two points.
Stereographic Stereographic projection SW.JPG Azimuthal Conformal Hipparchos(deployed) 200 BC (c.) Map is infinite in extent with outer hemisphere inflating severely, so it is often used as two hemispheres. Maps all small circles to circles, which is useful for planetary mapping to preserve the shapes of craters.
Orthographic Orthographic projection SW.jpg Azimuthal Hipparchos(deployed) 200 BC (c.) View from an infinite distance.
Vertical perspective Vertical perspective SW.jpg Azimuthal Matthias Seutter (deployed) 1740 View from a finite distance. Can only display less than a hemisphere.
Two-point equidistant Two-point equidistant projection SW.jpg Azimuthal Equidistant Hans Maurer 1919 Two “control points” can be arbitrarily chosen. The two straight-line distances from any point on the map to the two control points are correct.
Peirce quincuncial Peirce quincuncial projection SW.jpg Other Conformal Charles Sanders Peirce 1879
Guyou hemisphere-in-a-square projection Guyou doubly periodic projection SW.JPG Other Conformal Émile Guyou 1887
B.J.S. Cahill’s Butterfly Map Cahill Butterfly Map.jpg Polyhedral Compromise Bernard Joseph Stanislaus Cahill 1909
Cahill-Keyes projection World Map, Political, 2012, Cahill-Keyes Projection.jpg Polyhedral Compromise Gene Keyes 1975
Dymaxion map Dymaxion map unfolded.png Polyhedral Compromise Buckminster Fuller 1943
Craig retroazimuthal
Craig projection SW.jpg Retroazimuthal James Ireland Craig 1909
Hammer retroazimuthal, front hemisphere Hammer retroazimuthal projection front SW.JPG Retroazimuthal Ernst Hammer 1910
Hammer retroazimuthal, back hemisphere Hammer retroazimuthal projection back SW.JPG Retroazimuthal Ernst Hammer 1910
Littrow Littrow projection SW.JPG Retroazimuthal Joseph Johann Littrow 1833